J's Dumpster Rentals
Home/Blog/How to Load a Dumpster So Everything Fits

How to Load a Dumpster So Everything Fits

By Jeff Hensley · November 11, 2026 · Basics

Load flat things first, lay them on the floor of the dumpster, and build up from there. Bulky rigid pieces go in next, with bags and loose items packed into the gaps as you go, heavy items stay low and spread out, and Jeff can tell you how high to load it. With Richmond roll off rentals from J's, both sizes sit on a 12 by 6 foot footprint, and either one holds noticeably more debris when it's packed than when things go in as they come out of the house.

What goes in first?

Flat items go in first. Doors, tabletops, sheets of paneling or plywood, old cabinet backs, broken-down cardboard boxes and mattresses all lie flat on the floor of the dumpster and make a level base. A flat base gives everything after it a surface to sit on, so the next layer stacks instead of sliding into a slope.

Plan the first hour of loading around this. Before the bulky furniture comes out of the house, gather the flat pieces and get them into the dumpster. If you're tearing out a room, the drywall sheets, paneling and trim from the first wall make a good first layer.

How do you fill the gaps?

Fill the gaps as you load each layer. Put the bulky rigid pieces in next, such as dressers, chairs, the grill frame, an old desk, and set them so they sit still and touch each other. Then push bags, small boxes and loose items into the spaces around and between them before the next layer goes on.

Fill the space under a chair or inside a cabinet before anything heavy goes on top of it. Open furniture can be filled: set a bookcase on its back and fill the shelves, or pull the drawers out of a dresser, fill them with loose items and slide them back in. Bags of clothes, bedding and insulation squeeze into odd shapes and fill corners well.

What should you take apart before loading?

Take apart anything with open space inside its frame. A bed frame bolted together has open space inside it; unbolted, it's a few flat rails and two headboard panels. The same goes for metal shelving, cribs, bunk beds, tables with removable legs, swing sets and trampolines. You can take these apart with a drill or a socket set, and the flat pieces take less space in the dumpster.

Cut long items down so they lie flat inside the walls. Rolls of carpet can be cut into strips about three feet wide, rolled tight and taped, and the earlier post on flooring tear-outs explains cutting carpet from the back side with a utility knife. Long branches and fencing boards go in more neatly when they're cut to length.

Where do heavy items go?

Put heavy items low and spread them across the floor of the dumpster, instead of piling them in one corner or at one end. An even load sits level on the truck for the drive to the landfill on New Paris Pike.

Jeff bills concrete, dirt, shingles, and plaster and lath by weight, and he puts them in the heavy material dumpster, which is the 12-yard only, so a job with any of those gets planned with him before delivery. For everything else, the flat rate covers the load whatever it weighs, so a tight, well-packed dumpster costs the same as a loose one.

How do you pack a remodel load?

Pack a remodel load in layers, the same way as a household load. Lay drywall sheets, paneling and doors flat on the floor, and push the broken scraps into the gaps. Countertops go flat near the bottom. Take the doors off old cabinets and set the boxes upright side by side, then fill them with trim, scraps and bagged debris. A cast iron tub or a heavy vanity goes low and toward the middle. If the remodel includes plaster walls or a concrete floor, plan that part with Jeff before delivery, since those go in the 12-yard by weight.

How high can you load the dumpster?

Ask Jeff how high to load it. Keep everything inside the dumpster, with nothing sticking up over the rim or out past the ends, so the load stays in the dumpster on the road. The 12-yard has 43-inch walls, about waist height, and the 16-yard has 61-inch walls, on the same footprint.

If you're close to the top and there's still a pile in the yard, stop and call Jeff before stacking higher. He can talk through what's left and what to do with it.

Which side should you load from?

Load from the side closest to the work, and start at the far end of the dumpster. Filling the far end first keeps the near end open for walking up and setting things in, and it means the last items in are the ones closest to you. On a 12-foot dumpster, that leaves room to work in layers from one end to the other.

When you book, think about where the dumpster will sit relative to the door you'll carry things out of. Jeff places the dumpster on your driveway or another firm spot on your property, and a spot close to the garage or back door shortens every trip. If you're still choosing between the two sizes, the project picker on the size guide suggests one for your job.

How do you load safely?

Wear gloves and sturdy shoes, and lift with two people for anything large. Lift items over the side of the dumpster instead of climbing in with them, and avoid standing on a load that can shift. Pull or bend over nails in boards before they go in, or lay the boards with the nails pointing down.

Keep the area around the dumpster clear of loose debris so nobody trips on the way back to the house. If you're loading over several days, put the loose items in at the end of each day instead of leaving them on the driveway.

What has to stay out of the dumpster?

Keep freon appliances, TVs, propane tanks, tires, and five-gallon pails of paint or other liquids out of the load. Set those aside before loading starts, since they're harder to pull back out once furniture is stacked on top. Mattresses go in at the flat rate, as the earlier post on mattresses in a dumpster explains, and the accepted items list names places around Richmond that take the five excluded items.

Call Jeff at (765) 238-1393 before delivery day if you'd like help planning the load.

Rent a Dumpster in Richmond

12 and 16 yard roll-offs at published prices, from Jeff's yard in Richmond. Call to schedule: (765) 238-1393.

Keep Reading

Rent a Dumpster Around Richmond

Questions? Call or text Jeff.

Call Now